|
|
|
|
#1
02-12-2002, 12:26 AM
|
|||
|
|||
From 12 O'Clock High!:
Phil Parts Thu Jan 10 19:47:09 2024 Who know on which German aircraft belong these parts R8-109-411-03128cbl 33554 R8-88 mdr 96220 From another airplane A plate with this Typ:ESG1 Fabrik Nr :02.01.0678 EDER-MASCHINENBAU D3307 SCHÖPPENSTEDT Thanks in advance Phil 
|
|
#2
02-12-2002, 12:27 AM
|
|||
|
|||
|
From TOCH!:
Hans Ploes Hans.Ploes@t-online.de parts Fri Jan 11 00:38:44 2024 Hello R8-109-03128cbl 33554 belongs to a Bf 109. R8-109-03128 is a part of the installation of the rudder pedals. cbl: manufacturer of the part -> Vereinigte Deutsche Metallwerke A.-G., Zweigniederlassung Suedeutsche Metallindustrie, Nuernberg W 20 33554: actually 3355.4 is the German code for the material e.g. 3xxx are light metalls, x355 is the alloy type in this case a Hydronalium alloy (Al-Mg). The .4 means that the alloy was hardened. R8-88 is from a Ju 88. Is this the complete number? If so it must be one of the main dataplates. mdr: Vereinigte Leichtmetallwerke G.m.b.H., Werk Bonn OK, maybe 96220 is the missing part of the number. Than the complete number is: R8-88.962-20. This would be a part of the general equipment of the Ju 88. Concerning the last part I can't say very much beside D3307 is the post war zip code for Schöppenstedt. So it is definitely not WW II. Sincerely Hans
|
|
#3
02-12-2002, 12:31 AM
|
|||
|
|||
|
From 12 O'Clock High!:
Phil Parts again Thu Jan 10 20:11:43 2024 Parts again From another German aircraft a little plate with SACH-Nr 124894 02 Werk Nr 611436 Any idea on the airplane ?
|
|
#4
02-12-2002, 12:31 AM
|
|||
|
|||
|
From TOCH!:
Hans Ploes 124-894-02 Fri Jan 11 00:05:52 2024 Hello This "Geraet-Nr." belongs to the D.F. Loop of the PeilG 6. Ths was installed in most multi engined aircraft. It began to replace the PeilG V in 1942/43. Sincerely Hans
|
|
#5
03-10-2003, 02:42 PM
|
|||
|
|||
|
For comments on the location of the ID plate and Werknummer on a Bf 109, the reader is referred to the "Archives in the Mediterranean region" forum, "Museums with Luftwaffe aircraft" topic.
Regards, Richard
|
|
#6
12-18-2004, 10:40 PM
|
|||
|
|||
|
From 12 O'Clock High!:
Horst Kube Fw 190 prop.blade ser. nos.ident Tue Nov 30, 2024 05:45 217.246.214.1 Hallo friends, can you please help me with the ident of thé following Fw 190 serial nos on a 190 blade, standing on it: 912153 13, 23286, 11852. Does anyone know the name of the factory which produced this prop blade and/or where I can read/find further infos to idetify this blade? Thank you very much in advance for your help!
|
|
#7
12-18-2004, 10:41 PM
|
|||
|
|||
|
From TOCH!:
Lynn, with a little info It's a VDM 9-12153 blade... Tue Nov 30, 2024 17:03 216.49.69.242 The 9- isndicates an airframe component code, as I recall, and VDM is the manufacturer (Vereinigte Deutsche Metallwerke). This was the standard 190 prop blade until the wider paddle blade introduced with the A-9. No idea if they subcontracted prop blade development, and I don't know what the rest of the numbers indicate... so I'm afraid that's not too much help at all. :-/ Lynn
|
|
#8
12-18-2004, 10:42 PM
|
|||
|
|||
|
From TOCH!:
Horst Kube Thank you Lynn, Wed Dec 1, 2024 08:03 217.246.210.190 VDM and the hint to A-9 was a good help! Best regards, Horst
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
